Product Description
SpongeCol®is a collagen sponge with an interpenetrating, columnar porous architecture structure.SpongeCol®contains unique columnar porous network which permits cells and nutrients to flow completely through the interpenetrating pores and provides an increased surface area for cell attachment, growth and migration.
SpongeCol®is composed of highly purified Type I collagen which best supports the attachment, proliferation, and function of cells. The collagen is lightly cross-linked for increased mechanical strength and durability for short and long term tissue culture yet is still biodegradable over the longer-term. The diameter of the pores ranges from 100 to 400 micron with the average diameter being approximately 200 microns. The collagen disc is approximately 4 mm or 21 mm in diameter and 1.5 mm thick. The sponge discs fits into a 96-well (4 mm disc) or 12-well (21 mm disc) culture plate or sanitary luer connectors for flow perfusion. Each package contains 25 (4 mm) or 5 (21 mm) collagen sponge discs.
This product is terminally sterilized and ready-to-use.
| Parameter, Testing, and Method | SpongeCol®#5135 |
| Disc Diameter | 4mm or 21mm |
| Package Size | 25 or 5 Sponges/Pack |
| Disc Thickness | 1.5 mm |
| Pore Size | ~200 micron diameter with a range of 100-400 micron |
| Endotoxin - LAL | < 1.0 EU/mL |
| Storage Temperature | Room Temperature |
| Shelf Life | Minimum of 6 months from date of receipt |
| Sterilization Method | Irradiation |
| Sterility - USP modified | No growth |
| Collagen Source | Purified Type I Collagen |
| Collagen Purity - Silver Staining | >99% |
Directions for Use
Download the full PDF forSpongeCol® 4mm discsorSpongeCol® 21mm discs,or continue reading below:
A. Preparation and Seeding:
Note: Cell attachment to the sponge is generally the most critical step in tissue culture. Temperature, pH, gas exchange and cell concentration can affect the rate and efficiency of attachment. Optimum seeding rate depends on the type of cell being cultured.
- Aseptically remove the sponge discs from the packaging in a laminar flow work station.
- Carefully place the sponges into the wells of a 12 well (21mm sponge) or 96 well (4mm sponge) tissue culture plate using a sterile instrument. Be careful not to damage the sponge as it is being transferred. It is recommended to use non-treated tissue culture plasticware.Note: Tissue-coated plasticware may need to be coated with agarose to prevent cell attachment to the plastic instead of the sponge.
- Suspend cells at desired concentration (1×104– 1×105cells/mL) and dispense sufficient volume of cell solution on top of the sponge placed in the well. Note: An alternative method is to suspend cells in a neutralized collagen solution (such as PureCol® type I collagen Catalog #5005-100ML or PureCol® EZ Gel Catalog #5074-35ML). Dispense collagen/cell solution on top of the sponge placed in the well.
- Transfer to a 37ºC incubator for about 1 – 2 hours to allow for initial cell attachment.
- After 1 – 2 hour, remove the plate from the incubator and check for cell attachment. Additional testing may be required to optimize the time it takes for the cells to attach to the sponge. Check the morphology of the cells. Cell adherence and spreading will dictate the time for attachment.
- Once the cells have adequately attached to the sponge, increase the final volume in each well to fully cover and provide adequate medium for the culture system.
B. Changing the Media:
- Change the media 12 to 24 hours after the initial seeding. The frequency of changes will be determined by cell type, cell attachment efficiency, pH (maintain at pH 7.0 to 7.4) utilization of medium nutrients available to cultures. More frequent medium changes may be required compared to 2D culture systems.
C. Harvesting of Cells:
Note: Protease digestion is the standard method of releasing cells from the sponges. The strength of the attachment of the cells to the collagen sponges will vary from cell line to cell line. The enzyme concentration and digestion time will vary depending upon the activity of the enzyme and the confluence of the cells. Collagenase and/or trypsin may be the preferred method.
- Washing the sponge with EDTA-PBS may assist the protease digestion. Add sufficient volume to cover the sponge.
- Aspirate the EDTA-PBS solution from the well.
- Add sufficient dissociation solution to the well to fully over the sponge.
- Transfer to a 37ºC incubator. Check for cell detachment periodically for cell detachment.
- Once the cells have fully detached, remove the cells and dispense in a centrifuge tube.
- Centrifuge the cells as require.
Product Cell Assay
Endothelial Fibroblasts at 100X magnification. Images taken after 8 days of cell culture within SpongeCol®. Cells stained with Endothelial RSP.
Product References
References for SpongeCol®:
1. Mak, W. C., et al. “Thermo-Rheological Responsive Microcapsules for Time-Dependent Controlled Release of Human Mesenchymal Stromal Cells.”Biomater. Sci., vol. 5, no. 11, 2017, pp. 2241–2250., doi:10.1039/c7bm00663b.
2. Udhayakumar, Sivalingam, et al. “l-Arginine Intercedes Bio-Crosslinking of a Collagen–Chitosan 3D-Hybrid Scaffold for Tissue Engineering and Regeneration: in Silico, in Vitro, and in Vivo Studies.”RSC Advances, vol. 7, no. 40, 2017, pp. 25070–25088., doi:10.1039/c7ra02842c.
3. Ferreira, L.p., et al. “Design of Spherically Structured 3D in Vitro Tumor Models -Advances and Prospects.”Acta Biomaterialia, 2018, doi:10.1016/j.actbio.2018.05.034.
4. Hatsell, Sarah J., et al. “ACVR1 R206H Receptor Mutation Causes Fibrodysplasia Ossificans Progressiva by Imparting Responsiveness to Activin A.”Science Translational Medicine, vol. 7, no. 303, Feb. 2015, doi:10.1126/scitranslmed.aac4358.
5. Anton-Sales, I., Beekmann, U., Laromaine, A., Roig, A. & Kralisch, D. Opportunities of Bacterial Cellulose to Treat Epithelial Tissues.Current Drug Targets20,808–822 (2019).
Product Certificate of Analysis
Product Videos
SpongeCol® Collagen Sponge
Video
PureCol® EZ Gel - Easy 3D Collagen Gels
Video
Seeding Collagen Gels with Cells
Video
See More
Safety and Documentation
Safety Data Sheet
Certificate of Origin 4mm
Certificate of Origin 21mm
Declaration of Material Source
Product Disclaimer
This product is for R&D use only and is not intended for human or other uses. Please consult the Material Safety Data Sheet for information regarding hazards and safe handling practices.
